KNX Programming
KNX is the international building automation standard that provides high reliability and vendor independence. We design topology, select equipment, program and test.
from €25 · per KNX device
We program KNX in ETS from your design or from scratch. We work with owners, as well as with electricians and integrators who need a programmer for their project.
We always hand over the ETS project and the group address list: the system is not tied to us.
What’s included
Project structure
Topology, group addresses, clear naming.
Parameterisation
Actuators, push buttons, sensors, weather stations.
Lighting
Switching, dimming, DALI gateways.
Blinds and shutters
Including slat control and wind protection.
Climate
Room controllers, valves, air conditioners via gateways.
Logic and visualisation
Scenes on a logic module or server, app and wall panel.
How the work goes
- 1
Input data
Floor plan and device list.
- 2
Function table
What each button and each sensor does — agreed before programming.
- 3
ETS project
We prepare the project in advance, off site.
- 4
Download
On site or remotely via an IP interface.
- 5
Testing
Every function is checked against a checklist.
- 6
Handover
ETS project, group addresses, test report.
What you get
- ETS project (.knxproj)
- Group address list in CSV and PDF
- Function table by room
- Test report
Not included
- Installation and wiring of devices
- KNX equipment — we select it and prepare the specification
Price
from €25
per KNX device
What the price depends on
- — Number of devices and functions
- — Logic and visualisation
- — On site or remote
- — Whether a specification is already available
Timing
Project of up to 60 devices — 1–2 weeks of preparation and 2–4 days on site.
For Whom
- Private homes and villas
- Commercial properties
- Integrator partners
Systems Included
Frequently Asked Questions
Get a Preliminary Estimate
Leave your contact details — the engineer will get in touch, clarify the task and give you an approximate cost. The consultation is free.
Projects from the engineer's experience
Projects that Vladislav Kozlov, the engineer behind Tact Automation, worked on. Most were completed before the company was founded, as part of other integrators' teams.
Private residence, 860 m² — KNX across three bus lines
Basement plus two floors on three bus lines, 15 main groups and a reserve that survived four years of changes.
Private residence, 1 600 m² — KNX on four lines split by site zone
A three-year build handed over with all 1 877 group addresses named — a project another engineer can pick up without us.
Private residence, 1 100 m² — four Modbus segments, four homes
The owner reassigns his own switch keys through a web interface, without an integrator. Four Modbus segments appear in the app as four separate homes.